Skip to main content
Esc

Best LiFePO4 Batteries for RV House Banks

Your RV house battery bank is the heart of your electrical system. LiFePO4 batteries offer 10x the cycle life of lead-acid, weigh half as much, and deliver consistent voltage until nearly empty. Most RVers need 200-400Ah at 12V for comfortable boondocking.

What to Look For

Before comparing specific products, here are the key specs and features that matter most for rv house battery.

Capacity (Ah)

Amp-hours determine how long your battery lasts per charge. For rv house battery, we recommend at least 100Ah.

Voltage

12V batteries are standard for RVs, boats, and small cabins. 24V and 48V systems are more efficient for larger installations (less current = thinner wires, less loss). Match voltage to your inverter and charge controller.

Energy (Wh)

Watt-hours is the true measure of stored energy. Calculate your daily consumption in Wh, then size your battery bank for 2-3 days of autonomy. A 100Ah 12V battery stores 1,280Wh of usable energy.

Cycle Life

LiFePO4 batteries deliver 3,000-5,000 cycles to 80% capacity. At one cycle per day, that is 8-14 years of service. Cheaper batteries with lower cycle life cost more per kWh over their lifetime.

Weight

LiFePO4 batteries weigh roughly half of equivalent lead-acid. Weight matters for RV and marine applications where payload capacity is limited. A 100Ah LiFePO4 typically weighs 24-30 lbs vs 60+ lbs for lead-acid.

Max Discharge Current

Higher continuous discharge amps support larger inverter loads. A 2,000W inverter on a 12V bank draws ~170A. Verify your battery can sustain the current your inverter demands without BMS cutoff.

Series/Parallel Support

Series connections increase voltage (e.g., two 12V batteries = 24V). Parallel connections increase capacity (e.g., two 100Ah = 200Ah). Verify the BMS supports your wiring configuration and check maximum number of parallel units.

More Batteries Guides

Go Deeper